Datasheet

ManualsBrandsPLANET Technology ManualsPoE switchesIndustrial IP67 Rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch

IGS-5227-4MP2MT

Industrial IP67-rated

PoE Ethernet Switch

PoE IP Camera

IP Surveillance Domain

192.168.10.x/24

Wireless AP Domain

192.168.20.x/24

NVR

Dual Band Wireless AP

IGS-5227-4MP2MT

PoE PoE PoE

PoE

100BASE-TX UTP with PoE

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

Specications

Model

IGS-5227-4MP2MT

Hardware Specications

Copper Ports 6 x M12, 8-pin A-coded female connector, 10/100/1000BASE-T auto-MDI/MDI-X ports

Power Connector 1 x M23, 5-pin A-coded male connector

Switch Architecture Store-and-Forward

Switch Fabric 12Gbps/non-blocking

Throughput 8.9Mpps@64bytes

Address Table 8K entries, automatic source address learning and aging

Shared Data Buffer 4M bits

Flow Control

IEEE 802.3x pause frame for full-duplex

Back pressure for half-duplex

Jumbo Frame 9K bytes

Dimensions (W x D x H) 103 x 68.2 x 163 mm

Weight 1155 g

Enclosure IP67 aluminum case

Installation Wall-mount kit and DIN-rail kit

LED

System:

PWR1 (Green), PWR2 (Green), Fault ( Red )

Ring (Green), R.O. (Green)

10/100/1000T RJ45 Interfaces (Port 1 to Port 2):

LNK/ACT (Green)

10/100/1000T RJ45 Interfaces (Port 3 to Port 6):

LNK/ACT (Green)

PoE-in-Use (Orange)

Power Consumption Max. 155 watts/528.89 BTU

Power Requirements Dual 24~48V DC

ESD Protection 6KV DC

Power over Ethernet

PoE Standard IEEE 802.3at/802.3af PoE/PSE

PoE Power Supply Type End-span

PoE Power Output

Per port 51V DC, 350mA; max. 15.4 watts (IEEE 802.3af)

Per port 51V DC, 590mA; max. 36 watts (IEEE 802.3at)