Datasheet

IGS-5226-4P2T
1
Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port
10/100/1000T Managed Ethernet Switch(-40~75 degrees C)
Suitable for Industrial Environment
PLANET IGS-5226-4P2T, an Industrial Layer 2+ Managed Ethernet Switch, comes with
an IP50-rated industrial case, 4-port 10/100/1000T 802.3at PoE, 2-port 10/100/1000T,
and static Layer 3 routing, providing a high level of immunity against electromagnetic
interference and heavy electrical surges which are usually found on plant floors or
in curb-side traffic control cabinets. The IGS-5226-4P2T can be easily mounted on a
DIN rail or wall taking up less space. Each of the four Gigabit PoE+ ports provides
36 watts of power, which means a total power budget of up to 144 watts can be
utilized simultaneously without considering the different types of PoE applications being
employed. It also provides a quick, safe and cost-effective Power over Ethernet network
solution to IP security surveillance for small businesses and enterprises.
Physical Port
• 6-port 10/100/1000BASE-T dustproof RJ45 copper with 4-port
IEEE 802.3at/af Power over Ethernet Injector function
Hardware Conformance
• Complies with IEEE 802.3at Power over Ethernet Plus end-
span PSE
• Complies with IEEE 802.3af Power over Ethernet end-span
PSE
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE Port Power feeding priority
– Per PoE port power limitation
– PDclassicationdetection
– PD alive check
– PoE schedule
– PD scheduled power recycling
• IP50-rated metal case
• Redundant power design
– 48 to 56V DC, redundant power with polarity reverse
protect function
– Active-active redundant power failure protection
– Backup of catastrophic power failure on one supply
– Fault tolerance and resilience
• DIN-rail and wall-mount design
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route summarization
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture, and runt/
CRClteringthateliminateserroneouspacketstooptimizethe
network bandwidth
2 x Waterproof Gigabit RJ45
IP50 Rugged Case
4 x Waterproof Gigabit PoE+ RJ45
48~56V DC Waterproof M12
Redundant Power Input