Quick Guide

9
To check the current IP address or modify a new IP address for the
Switch,pleaseusetheprocedureasfollows:
 Display of the current IP Address
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressshowninFigure4-2
Figure 4-2: IP Information Screen
 CongurationoftheIPAddress
3.At the“#” prompt, enter the followingcommand and press <Enter>
asshowninFigure4-3.
IGS-5225-8T2S2X#congureterminal
IGS-5225-8T2S2X(cong)#interface vlan 1
IGS5225-8T2S2X(cong-if-vlan)#ip address 192.168.1.100
255.255.255.0
The previous command would apply the following settings for the
IndustrialManagedSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 4-3: Conguring IP Address Screen
4.Repeatstep1tocheckiftheIPaddresshaschanged.