Quick Guide
11
5. Starting Web Management
The following shows how to start up the Web Management of the
Industrial Managed Switch. Note the Industrial Managed Switch is
congured through an Ethernet connection. Please make sure the
manager PC must be set to the same IP subnet address.
Forexample,thedefaultIPaddressoftheIndustrialManagedSwitchis
192.168.0.100, then the manager PC should be set to 192.168.0.x
(where x is a number between 1 and 254, except 100), and the
defaultsubnetmaskis255.255.255.0.
IP Address:
192.168.0.x
IP Address:
192.168.0.100
IGS Industrial Switch
RJ45/UTP-Cable
Figure 5-1: IP Management Diagram
5.1 Logging in to the Industrial Managed Switch
1.Use Internet Explorer 8.0 or above for Web browser and enter IP
address http://192.168.0.100 (the factory-default IP address) to
access the Web interface.
2.Whenthe following dialogbox appears,please enter the default user
name “admin” and password “admin” (or the password you have
changedbefore)asshowninFigure5-2.