Datasheet

IGS-5225-8P4S-12V/IGS-5225-8P4S
IGS-5225-8P2T2S/IGS-5225-8P2T4S
22
IGS-5225-8P4S-12V/IGS-5225-8P4S
IGS-5225-8P2T2S/IGS-5225-8P2T4S
• 12~54V DC, redundant power with reverse polarity protection
(IGS-5225-8P4S-12V only)
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input and Digital Output
• 2 digital input (DI)
• 2 digital output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route summarization
• Routing interface provides per VLAN routing mode
Layer 2 Features
• Storm Control support
– Broadcast/Multicast/Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Port Isolation
– MAC-based VLAN
– IP Subnet-based VLAN
– Protocol-based VLAN
– VLAN Translation
– Voice VLAN
– GVRP
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Filtering/BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 6 trunk groups with 4 ports per trunk group
– Up to 8Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcona
particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection (UDLD)
that monitors a link between two switches and blocks the ports
on both ends of the link if the link fails at any point between the
two devices
• Link Layer Discovery Protocol (LLDP)
• IEEE 802.3ah OAM
ERPS Ring for Video Transmission Redundancy
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
1000BASE-SX/LX Fiber-optic
1000
PoE
1000BASE-T UTP with PoE
1000
1000
1000
1000
Recovery time <10ms
IGS-5225-8P2T4S
IGS-5225-8P2T2S
IGS-5225-8P4S
Network Video
Recorder
Traffic Control Center
PoE
PoE
PoE
PoE
PoE
PoE
High Power PoE for Security and Public Service Applications
As the whole system comes with a total 240-watt PoE budget, the IGS-5225 PoE
Series is designed specifically to satisfy the growing demand of higher power
consuming network PDs (powered devices) such as multi-channel (802.11n/ac/ax)
wireless LAN access points, PTZ (pan, tilt, zoom) speed dome network cameras and
other PoE network devices.
Intelligent Alive Check for Powered Device
The IGS-5225 PoE Series can be configured to monitor connected PD’s status in real
time via ping action. Once the PD stops working and responding, the IGS-5225 PoE
Series will recycle the PoE port power and bring the PD back to work. It also greatly
enhances the reliability in that the PoE port will reset the PD power, thus reducing
administrator’s management burden.
PoE PD Alive Check
Restart PoE Device
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection
on the Earth, the IGS-5225 PoE Series can effectively control the power supply besides
its capability of giving high watts power. The built-in “PoE schedule” function helps
you to enable or disable PoE power feeding for each PoE port during specified time
intervals and it is a powerful function to help SMBs or enterprises save power and
money.
Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours
Total Saved = 10800watts/month
6 Watts 6 Watts 12 Watts 12 Watts
PoE Schedule
08:00~17:00 17:00~08:00
6 Watts 6 Watts 12 Watts 12 Watts
OFF OFF OFF
ON ON ON ON ON