Datasheet

2
IGS-5225-8P4S/IGS-5225-8P2T2S/IGS-5225-8P2T4S
Industrial Case and Installation
• IP30 aluminum case
• DIN-rail or wall-mount design
• 48~56V DC, redundant power with reverse polarity protection
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input and Digital Output
• 2 digital input (DI)
• 2 digital output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route summarization
• Routing interface provides per VLAN routing mode
Layer 2 Features
• Storm Control support
– Broadcast/Multicast/Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Port Isolation
– MAC-based VLAN
– IP Subnet-based VLAN
– Protocol-based VLAN
– VLAN Translation
– Voice VLAN
– GVRP
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Filtering/BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 6 trunk groups with 4 ports per trunk group
– Up to 8Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcona
particular port
High Power PoE for Security and Public Service Applications
As the whole system comes with a total 240-watt PoE budget, the IGS-5225 PoE
Series is designed specifically to satisfy the growing demand of higher power
consuming network PDs (powered devices) such as multi-channel (802.11n/ac/ax)
wireless LAN access points, PTZ (pan, tilt, zoom) speed dome network cameras
and other PoE network devices.
Intelligent Alive Check for Powered Device
The IGS-5225 PoE Series can be configured to monitor connected PD’s status in
real time via ping action. Once the PD stops working and responding, the IGS-
5225 PoE series recycle the PoE port power and bring the PD back to work. It also
greatly enhances the reliability in that the PoE port will reset the PD power, thus
reducing administrator’s management burden.
ERPS Ring for Video Transmission Redundancy
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
1000BASE-SX/LX Fiber-optic
1000
PoE
1000BASE-T UTP with PoE
1000
1000
1000
1000
Recovery time <10ms
IGS-5225-8P2T4S
IGS-5225-8P2T2S
IGS-5225-8P4S
Network Video
Recorder
Traffic Control Center
PoE
PoE
PoE
PoE
PoE
PoE
PoE PD Alive Check
Restart PoE Device
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the IGS-5225 PoE Series can effectively control the
power supply besides its capability of giving high watts power. The built-in “PoE
schedule” function helps you to enable or disable PoE power feeding for each
PoEportduringspeciedtimeintervalsanditisapowerfulfunctiontohelpSMBs
or enterprises save power and money.
PoE
1000BASE-T UTP with PoE
6 Watts 6 Watts 12 Watts 12 Watts
Total Consumption of 36 watts/hr
PoE
PoE PoE
PoE
Power
On
Power
On
Power
On
Power
On
5 PM8 AM
5 PM 8 AM
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts/hr during off-business hours
PoE PoE
Total Saved = 10800 watts/month
PoE PoE
Power
On
Power
Off
Power
Off
Power
Off