Datasheet

IGS-5225-8P4S/IGS-5225-8P2T2S/IGS-5225-8P2T4S
1
Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 1G/2.5G
SFP Managed Ethernet Switch Series
Advanced Manageable PoE Solution for Hardened Environment
PLANET IGS-5225 PoE Series L2+ Industrial Managed PoE+ Switch, featuring 8
10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts,
and two 100/1000/2500 BASE-X SFP ports in an IP30 rugged metal case, can be
installed in any difficult environment. It provides user-friendly yet advanced IPv6/
IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3
static routing capability, and advanced ITU-G.8032 ERPS Ring technology to
improve the rapid self-recovery capability and PLANET intelligent PoE functions
for controlling the PoE outdoor IP surveillance and wireless network applications. It
is able to operate reliably, stably and quietly in the temperature range from -40 to
75 degrees C.
Physical Port
• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE
802.3at PoE+ Injector
• 2 100/1000/2500BASE-X SFP ports for SFP type auto
detection
• 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports (IGS-
5225-8P2T2S and IGS-5225-8P2T4S)
• One RJ45 console interface for basic management and setup
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus/end-
span PSE
• Up to 8 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE management features
– PoE admin-mode control
– PoE management mode selection
– PoE Legacy mode selection
– PoE Budget setup option
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limit
– PoE Port Status monitoring
– PDclassicationdetection
– Sequence port PoE
– PoE extend mode control to support power feeding up to a
distance of up to 160 meters
• Intelligent PoE features
– Temperature threshold control
– PoE usage threshold control
– PoE schedule
– PD alive check
– LLDP PoE Neighbors
Industrial Protocol
• Modbus TCP for real-time monitoring in the SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol) transparent clock
mode
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-5225 PoE Series supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant
power input system into customer’s industrial automation network to enhance
system reliability and uptime in harsh factory environments. In a simple Ring
network, the recovery time of data link can be as fast as 10ms.