Datasheet

IGS-5225-4UP1T2S
8
Specications
Product
IGS-5225-4UP1T2S
HardwareSpecications
Hardware Version 4
Copper Ports 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
2 1000BASE-SX/LX/BX SFP interfaces (Port-6 to Port-7)
Compatible with 100BASE-FX SFP
PoE Injector Port 4 ports with 802.3bt PoE++/802.3at PoE injector function with Port-1 to Port-4
Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 14Gbps/non-blocking
Throughput (packet per second) 10.42Mpps@ 64 bytes packet
Address Table 8K entries, automatic source address learning and aging
SharedDataBu󰀨er 4Mbits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 9Kbytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection 6KV DC
Enclosure IP30 aluminum case
Installation DIN-rail or wall mounting
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
DI/DO
2 Digital Input (DI)
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input load to 24V DC, 10mA max.
2 Digital Output (DO) Open collector to 24V DC, 100mA max.
LED Indicator
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Ring (Green)
Ring Owner (Green)
DIDO (Red)
Per 10/100/1000T RJ45 Ports:
100 LNK/ACT (Amber)
1000 LNK/ACT (Green)
Per SFP Interface:
100 LNK/ACT (Amber)
1000 LNK/ACT (Green)
Per PoE Port:
802.3bt PoE++-in-use x 1 (Green)
802.3at/af PoE-in-use x 1 (Amber)
PoE Usage:
60W, 120W, 180W, 240W (Amber)
Dimensions (W x D x H) 78 x 107 x 152 mm
Weight 1050g
Power Requirements Dual 48~56V DC (>52V DC for PoE+ output recommended)
Power Consumption
Max. 6.6 watts/22.52BTU (Power on without any connection)
Max. 282 watts/962.22BTU (Full loading with 802.3bt PoE++ function)
Power Over Ethernet
PoE Standard IEEE 802.3bt PoE++ Type-4 PSE
PoE Power Supply Type 802.3bt/End-span/Mid-span/UPoE/Force
PoE Power Output
802.3bt PoE++
- Per port 52V~56V DC (depending on the power supply), max. 90 watts
UPoE(PoH)
- Per port 52V~56V DC (depending on the power supply), max. 95 watts