User's Manual

User’s Manual of IGS-5225 series
33
Power Pin Assignment
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
UPoE: 1/2(-
), 3/6(+),4/5(+),
7/8(-)
1/2(+), 3/6(-)
N/A
PoE Power Budget
240W maximum
(depending on power
input)
Dual power input: 144W
maximum (depending on
power input)
N/A
PoE Ability PD @ 15 watts 8 4 N/A
PoE Ability PD @ 30 watts 8 4 N/A
PoE Ability PD @ 60 watts 8 4 N/A
PoE Management Functions
Active PoE device alive detects Yes N/A
PoE Power Recycle Yes, daily or predeinded schedule N/A
PoE Schedule 4 schedule profiles N/A
PoE Extend Mode Yes, max. 160 to 200 meters N/A
PoE System Management
System PoE Admin control
Total PoE power budget control
Auto power input and PoE budget control
PoE Legacy mode
Over-temperature threshold alarm
PoE usage threshold alarm
N/A
PoE Port Management
PoE mode control
 802.3bt
 UPoE
 802.3at End-span
 802.3at Mid-span

Force mode
N/A N/A
Layer 3 Functions
IP Interfaces Max. 8 VLAN interfaces
Routing Table Max. 32 routing entries
Routing Protocols
IPv4 software static routing
IPv6 software static routing
Layer 2 Functions
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port link capability control
Port Status
Display each port’s speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
Port Mirroring
TX/RX/both
Many-to-1 monitor
Up to 5 sessions