User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 Users Configuration
- 4.2.1.5 Privilege Levels
- 4.2.1.6 NTP Configuration
- 4.2.1.6.1 System Time Correction Manually
- 4.2.1.7 Time Configuration
- 4.2.1.8 UPnP
- 4.2.1.9 DHCP Relay
- 4.2.1.10 DHCP Relay Statistics
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.1.16 Fault Alarm
- 4.2.1.17 Digital Input/Output
- 4.2.2 Simple Network Management Protocol
- 4.2.3 RMON
- 4.2.4 DHCP server
- 4.2.5 Industrial Protocol
- 4.2.6 Remote Management
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLAN
- 4.3.3.1 VLAN Overview
- 4.3.3.2 IEEE 802.1Q VLAN
- 4.3.3.3 VLAN Port Configuration
- 4.3.3.4 VLAN Membership Status
- 4.3.3.5 VLAN Port Status
- 4.3.3.6 Private VLAN
- 4.3.3.7 Port Isolation
- 4.3.3.8 VLAN setting example:
- 4.3.3.9 MAC-based VLAN
- 4.3.3.10 IP Subnet-based VLAN Membership Configuration
- 4.3.3.11 Protocol-based VLAN
- 4.3.3.12 Protocol-based VLAN Membership
- 4.3.4 Spanning Tree Protocol
- 4.3.5 Multicast
- 4.3.6 MLD Snooping
- 4.3.7 MVR (Multicast VLAN Registration)
- 4.3.8 LLDP
- 4.3.9 MAC Address Table
- 4.3.10 Loop Protection
- 4.3.11 UDLD
- 4.3.12 GVRP
- 4.3.13 PTP
- 4.3.14 Link OAM
- 4.4 Quality of Service
- 4.5 Security
- 4.6 Power over Ethernet
- 4.7 Ring
- 4.8 ONVIF
- 4.9 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of IGS-5225 series
31
IGS-5225-4UP1T2S/IGS-5225-4P2S/IGS-5225-4T2S
Product IGS-5225-4UP1T2S IGS-5225-4P2S IGS-5225-4T2S
Hardware Specifications
Copper Ports
5 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X
ports
4 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X
ports
4 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X
ports
SFP/mini-GBIC Slots
2 1000BASE-SX/LX/BX
SFP interfaces (Port-6 to
Port-7)
Compatible with
100BASE-FX SFP
2 1000BASE-SX/LX/BX
SFP interfaces (Port-5 to
Port-6)
Compatible with
100BASE-FX SFP
2
1000/2500BASE-
SX/LX/BX
SFP interfaces (Port-5 to
Port-6)
Compatible with
100BASE-FX SFP
PoE Injector Port
4 ports with Ultra
PoE/802.3at/af PoE
injector function with Port-
1
to Port-4
4 ports /802.3at/af PoE
injector function with Port-
1
to Port-4
N/A
Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection 6KV DC
Enclosure IP30 aluminum case IP40 metal case IP30 metal case
Installation DIN-rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal
block for DI/DO interface
Pin 1/2 for DI 1 & 2,
Pin 3/4
for DO 1 & 2, Pin 5/6 for
GND
N/A N/A
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
Digital Input (DI)
2 digital input:
Level 0: -24~2.1V (±0.1V)
Level 1: 2.1~24V (±0.1V)
Input load to 24V DC,
10mA max.
N/A
N/A
Digital Output (DO)
2 digital output:
Open collector to 24VDC,
100mA
N/A N/A
Dimensions (WxDxH) 76 x 107 x 152 mm 50 x 87.8 x 135 mm 32 x 87x 135 mm
Weight 1050g 610g 456g
Power Requirements
48~56V DC (>52V DC for
PoE+ and PoE++ output
48~56V DC (>52V DC for
PoE+ output
Dual 12~48V DC
24V AC