IGS-5225-Series (V3) Quick Guide

6
3. Wiring the Power Inputs
The Upper Panel of the Industrial Managed Switch comes with one
6-contact terminal block. Please follow the steps below to insert the
power wire.
1. Insert positive/negative DC power wires into Contacts 1 and 2 for
Power 1, or Contacts 5 and 6 for Power 2.
 IGS-5225-8P4S/IGS-5225-8P2T2S/IGS-5225-8P2T4S: DC 48~56V
PWR1
PWR2
Alarm
DI1 DO0 DO1DI0 GNDGND
DC Input:
48-56V , 6A max.
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-1: IGS-5225-8P4S/IGS-5225-8P2T2S/IGS-5225-8P2T4S Upper Panel
 IGS-5225-8P4S-12V: DC 12~54V
PWR1
PWR2
Alarm
DI1 DO0 DO1DI0 GNDGND
DC Input:
12-54V , 6A max.
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-2: IGS-5225-8P4S-12V Upper Panel