Manualshelf

IGS-5225-Series (V3) Quick Guide

ManualsBrandsPLANET Technology ManualsIndustrial SwitchesL2+ Industrial 4-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch
11121314151617181920
17
6.RecoveringBacktoDefaultConguration
To reset the IP address to the default IP address “192.168.0.100”
and the user password to factory default mode (default password
is admin), press the hardware reset button on the front panel for
about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx
and default password. Be noted that all the previous setups will be
disappeared after the factory default reset is made.
P1 P2 Alarm
Ring
Reset
115200,N,8,1
1G/2.5G
LNK/ACT
R.O.
6
5
100
LNK/ACT
Reset
Figure 6-1: IGS-5225-4T2S Reset Button