Quick Guide

12
5. Starting Web Management
The following shows how to start up the Web Management of the
Industrial Managed Switch. Note the Industrial Managed Switch is
congured through an Ethernet connection. Please make sure the
manager PC must be set to the same IP subnet address.
Forexample,thedefaultIPaddressoftheIndustrialManaged Switchis
192.168.0.100, then the manager PC should be set to 192.168.0.x
(where x is a number between 1 and 254, except 100), and the
defaultsubnetmaskis255.255.255.0.
IP Address:
192.168.0.x
IP Address:
192.168.0.100
IGS Industrial Switch
RJ45/UTP-Cable
Figure 5-1: IP Management Diagram
5.1 Logging in to the Industrial Managed Switch
1.Use Internet Explorer 8.0 or above for Web browser and enter IP
address http://192.168.0.100 (the factory-default IP address) to
access the Web interface.
2.Whenthe following dialogbox appears,please enter the default user
name “admin” and password “admin” (or the password you have
changedbefore)asshowninFigure5-2.