(V2) User Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
4.3 Side Wall-mount Plate Mounting
Caution
You must use the screws supplied with the wall-
mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate your warranty.
Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource on PLANET web site rst to check if it could
solve your issue. If you need more support information, please
contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
[e-mail]
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
5. Three-View Diagram
The three-view diagram of the Industrial Gigabit Ethernet
Switch consists of multiple auto-sensing 10/100/1000BASE-T RJ45
ports and one 100/1000X SFP slot, and one removable terminal
block. The LED indicators are also located on the front panel.
 IGS-510TF
104.00
30.00
70.00
18.00
9.00
91.00
52.00 52.00
28.00
48.80
40.00
18.00
40.00
18.00
15.20
15.00
11.00
45.00
10.00
147.00
28.00
28.00
Mounting Kit
Mounting Kit
DIN-Rail Kit
Unit: mm
Rear ViewSide View Side View
Top View
Front View
Bottom View
5
P1 P2
1
2
3
4
IGS-510TF
ACTLNK
ACTLNK
1000
10/
100
V1+
V1-
PWR1
V2+
V2-
PWR2
DC Input: 9-48V , 0.6A max. AC Input: 24V , 0.3A max.
Figure3: IGS-510TF Three-View Diagram
FCC Warning
This device has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
WEEE Warning
To avoid the potential eects on the environment and
human health as a result of the presence of hazardous
substances in electrical and electronic equipment, end
users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol. Do
not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately
PLANET TECHNOLOGY CORPORATION
e-mail: [e-mail] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:[phone] Fax:[phone]
EC Declaration of Conformity
I hereby confirm that the following equipment complies with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility Directive on (2014/30/EU).
Type of Product:
Industrial Compact 4-Port 10/100/1000T + 1-Port 100/1000X SFP Gigabit Ethernet Switch
Model:
IGS-510TF
Produced by:
Manufacturer’s Name: Planet Technology Corporation
Manufacturer’s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan, R.O.C.
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 (2015 + AC:2016)
EN 55024 (2010 + A1:2015)
EN 55035 (2017)
Person responsible for making this declaration
Name: Kent Kang
Title: Director
Taiwan
March 23, 2020
Country
Date
Legal Signature