Datasheet

IGS-501T
1
5-Port 10/100/1000T Industrial Gigabit Ethernet Switch with Wide
Operating Temperature
Slim Type for More Practicability and Convenience
PLANET IGS-501T slim-type Industrial 5-Port 10/100/1000T Gigabit Ethernet
Switch, suitable for industrial use, features 5 1000Mbps auto-negotiation ports,
IP30-rated rugged but compact case and a wide-ranging redundant power system
(9~48V DC or 24V AC). The IGS-501T is able to operate in any harsh environment
with operating temperature ranging from -40 to 75 degrees C.
As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually
in demand, the IGS-501T is especially designed to make the deployment of an
industrial network easy as it comes with a Plug and Play feature. Besides, it is
stable and reliable when it comes to fast data and power transmission.
Low Power Consumption for Green Networking
The IGS-501T, adopting the advanced green networking technology, provides the
link-on cable length power saving and link-down power saving methods. These
features make the IGS-501T consume very low power in full load operation mode,
which helps conserve energy effectively but maintains high performance efciently.
With the Auto Power Saving and IEEE 802.3az Energy Efcient Ethernet (EEE)
Protocol, the IGS-501T can automatically detect cable link status and network
traffic, and thus is able to adjust power consumption accordingly. It enables the
switch to consume less power when it is less active.
Dual Power Input for High Availability Network System
The IGS-501T features a strong dual power input system with wide-ranging
voltages (9V~48V DC or 24V AC) incorporated into customer’s automation network
to enhance system reliability and uptime. In the example below, when power supply
1 fails to work, the hardware failover function will be activated automatically to
keep powering the IGS-500T via power supply 2 alternatively without any loss of
operation.
Physical Port
• 5-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X
function
Layer 2 Features
• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standard
• Supports auto-negotiation and 10/100Mbps half/full duplex
and 1000Mbps full duplex
• High-performance Store and Forward architecture, broadcast
storm control and runt/CRC ltering eliminate erroneous
packets to optimize the network bandwidth
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
• Backplane (switching fabric): 10Gbps
• Integrated address look-up engine, supporting 2K absolute
MAC addresses
• 4M bits on-chip buffer memory
• 9K jumbo packet size
• Automatic address learning and address aging
• CSMA/CD Protocol
Industrial Case and Installation
• IP30 metal case
• DIN-rail and wall-mount design
• 9 to 48V DC, redundant power with reverse polarity
protection, and connective, removable terminal block for
master and slave power; 24V AC power support
• Supports EFT protection 6000V DC for power line
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature