Datasheet

IGS-500T
2
Low Power Consumption for Green Networking
The IGS-500T, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power saving methods.
These features make the IGS-500T consume very low power in full load operation mode, which helps conserve energy effectively but maintains high
performanceefciently.
With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the IGS-500T can automatically detect cable link status and
networktrafc,andthusisabletoadjustpowerconsumptionaccordingly.Itenablestheswitchtoconsumelesspowerwhenitislessactive.
Dual Power Input for High Availability Network System
The IGS-500T features a strong dual power input system with wide-ranging voltages (9V~48V DC or 24V AC) incorporated into customer’s automation
network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated
automatically to keep powering the IGS-500T via power supply 2 alternatively without any loss of operation.
9V~48V DC
9V~48V DC
DC DC
Power
1
Power
2
Active Active
Camera
PC
Non-stop Ethernet Server
Dual Power Input with Auto Failover
9V~48V DC
9V~48V DC
DC DC
Power
1
Power
2
Active
Camera
PC
DC
Power Line (DC)
1000BASE-T UTP
High Switch Performance
The IGS-500T offers high-performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-
speed throughput as high as 10Gbps and the 2K MAC address table, the IGS-500T can perform wire-speed packet transfer without the risk of packet loss.
TheowcontrolfunctionenablestheIGS-500Ttoprovidefastandreliabledatatransfer.
Plug and Play
All of the RJ45 copper interfaces in the IGS-500T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e
cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover
cables.