Datasheet

ManualsBrandsPLANET Technology ManualsDIN-rail Unmanaged Ethernet SwitchesCompact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch

Data Sheet

Key Features

IGS-500T

Compact Industrial 5-Port 10/100/1000T Gigabit

Ethernet Switch

Compact Size for More Practicability and Convenience

PLANET IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit

Ethernet Switch, suitable for industrial use, features 5 1000Mbps auto-

negotiation ports, IP30-rated rugged but compact case and a wide-ranging

redundant power system (12~48V DC or 24V AC). The IGS-500T is able to

operate in any harsh environment with operating temperature ranging from -40

to 75 degrees C.

Physical Port

• 5-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X

function

Layer 2 Features

• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u

100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet

standard

• Supports auto-negotiation and 10/100Mbps half/full duplex

and 1000Mbps full duplex

• Prevents packet loss with back pressure (half-duplex) and

IEEE802.3xpauseframeowcontrol(full-duplex)

• High-performance Store and Forward architecture,

broadcaststormcontrolandrunt/CRClteringeliminate

erroneous packets to optimize the network bandwidth

• Backplane (switching fabric): 10Gbps

• Integrated address look-up engine, supporting 4K absolute

MAC addresses

• 9K jumbo packet size

• Automatic address learning and address aging

• CSMA/CD Protocol

Industrial Case and Installation

• IP30 metal case

• DIN rail and wall-mount design

• 12 to 48V DC, redundant power with polarity reverse

protect function and connective, removable terminal block

for master and slave power; 24V AC power support

• Supports 6000 VDC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

• Free fall, shock-proof and vibration-proof for industries

104mm

135mm

IGS-500T IGS-501T

Compact Industrial 5-Port Switch

Summary of content (5 pages)

PAGE 1
IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch Physical Port Key Features • 5-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X function Layer 2 Features • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.
PAGE 2
IGS-500T As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually in demand, the IGS-500T is especially designed to make the deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and power transmission.
PAGE 3
IGS-500T Application Designed for Heavy Industries The IGS-500T’s IP30-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data.
PAGE 4
IGS-500T Specifications Model IGS-500T Hardware Specifications Hardware Version 4 Copper Ports 5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation Connector Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Alarm Provides one relay output for power failure Alarm relay current carry ability: 1A@DC 24V LED 3 x LED for system and power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Red: Power Fault 2 x LED for each copper port ■ Green: 1000Mbps L
PAGE 5
IGS-500T Diagram Top View DC1 V1+ V1- Fault 1A@24V V2+ V2- DC2 Input DC12~48V, AC 24V Side View Front View P1 LNK Rear View Side View P2 FAULT ACT 52.00 1000 1 2 91.00 9.00 104.00 30.00 3 4 52.00 50.00 5 100 21.69 LNK ACT IGS-500T 28.65 18.00 70.00 30.