Datasheet

IGS-4215-8P2T2S
1
Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T
+ 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C)
Cost-effective Full PoE+ Power Solution Ideal for Hardened Environment
Designed to be installed in heavy industrial demanding environments, the IGS-4215-
8P2T2S is the new member of PLANET Industrial-grade, DIN-rail type L2/L4 Managed
Gigabit PoE+ Switch family featuring PLANET intelligent PoE functions to improve the
availability of critical business applications. It provides IPv6/IPv4 dual stack management
and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000BASE-T ports
featuring 30-watt 802.3at PoE+, 2 additional Gigabit copper ports and another 2 extra
100/1000BASE-X SFP fiber slots for data and video uplink. The IGS-4215-8P2T2S is
able to operate reliably, stably and quietly in any hardened environment without affecting
its performance. It comes with a total power budget of up to 240 watts for different kinds
of PoE applications and operating temperature ranging from -40 to 75 degrees C in a
rugged IP30 metal housing.
Physical Port
• Eight 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
IEEE 802.3at/af PoE+ Injector (Port-1 to Port-8)
• Two 10/100/1000BASE-T Gigabit Ethernet RJ45 ports (Port-9
and Port-10)
• Two 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection (Port-11 and Port-12)
• One RJ45 console interface for basic management and setup
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus, end-
span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• 240-watt PoE budget
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limitation
– PDclassicationdetection
– PD alive-check
– PoE schedule
Industrial Case and Installation
• IP30 aluminum case
• DIN rail and wall-mount design
• 48~56V DC, redundant power with polarity reverse protect
function
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Switching
• Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full
duplex), auto-negotiation and auto MDI/MDI-X
• FeaturesStore-and-Forwardmodewithwire-speedlteringand
forwarding rates
• IEEE802.3xowcontrolforfullduplexoperationandback
pressure for half duplex operation
• 8K MAC address table size
• 10K jumbo frame