Datasheet

IGS-4215-8P2T2S
3
– IPv4/IPv6 IP-based ACE
– MAC-based ACL
– MAC-based ACE
• MAC Security
– Static MAC
– MACltering
• PortsecurityforsourceMACaddressentriesltering
• DHCPsnoopingtolterdistrustedDHCPmessages
• Dynamic ARP inspection discards ARP packets with invalid
MAC address to IP address binding
• IPsourceguardpreventsIPspoongattacks
• DoS attack prevention
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
– Web switch management
– Console/Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management
– SNMPtrapforinterfaceLinkUpandLinkDownnotication
– Four RMON groups (history, statistics, alarms and events)
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Congurationupload/downloadthroughHTTP/TFTP
– Dual images
– Hardware reset button for system reboot or reset to factory
default
• SNTP Network Time Protocol
• Network Diagnostic
– Cable diagnostics
– ICMPv6/ICMPv4 Remote Ping
– SFP-DDM (Digital Diagnostic Monitor)
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-
MED
• Event message logging to remote syslog server
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS system and CloudViewer for deployment
management
IP Camera
S M T W T F S
AP Router IP Phone
PoE lighting
Door Phone
Automatically Reboot
PoE Schedule for Energy Savings
Under the global trend of energy saving and contributing to environmental protection,
the IGS-4215-8P2T2S can effectively control the power supply besides its capability
of giving high watts power. The “PoE schedule” function helps you to enable or
disablePoEpowerfeedingforeachPoEportduringspeciedtimeintervals,whichisa
powerful function to help SMBs or enterprises save power and budget. It also increases
security by powering off PDs that should not be in use during non-business hours.
Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours
Total Saved = 10800watts/month
6 Watts 6 Watts 12 Watts 12 Watts
PoE Schedule
08:00~17:00 17:00~08:00
6 Watts 6 Watts 12 Watts 12 Watts
OFF OFF OFF
ON ON ON ON ON
Intelligent LED Indicator for Real-time PoE Usage Monitoring
Via the power usage chart in the web management interface, the IGS-4215-8P2T2S
enables the administrator to monitor the status of the power usage of the connected
PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.
Moreover, the IGS-4215-8P2T2S helps users to monitor the current status of PoE
powerusageeasilyandefcientlyviaitsadvancedLEDindication.Called“PoE Power
Usage”, the front panel of the IGS-4215-8P2T2S has four amber LEDs indicating four
different PoE power usages, namely 60W, 120W, 180W and 240W.
802.3at PoE+ Power and Ethernet Data Transmission Distance Extension
In the “Extend” operation mode, the IGS-4215-8P2T2S operates on a per-port basis at
10Mbps duplex operation but can support 20-watt PoE power output over a distance of
up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-
new feature, the IGS-4215-8P2T2S provides an additional solution for 802.3at/af PoE
distance extension, thus saving the cost of Ethernet cable installation.
Extend Mode
Power
250 meters (820 feet)
PoE
PoE
10BASE-T UTP with PoE
PoE IP Camera
PoE Switch