Datasheet

IGS-4215-8P2T2S
2
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Layer 2 Features
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
– Protocol VLAN
– Voice VLAN
– Private VLAN (Protected port)
– Management VLAN
– GVRP
• Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 8 trunk groups, up to 4 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
Quality of Service
• Ingress/Egress Rate Limit per port bandwidth control
– Trafcclassication
• IEEE 802.1p CoS
• TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
• Supports IPv4 IGMP snooping v2, v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
Security
• Storm Control support
– Broadcast/ unknown multicast/unknown unicast
• Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– DHCP Option 82
– RADIUS/TACACS+ authentication
• Access Control List
– IPv4/IPv6 IP-based ACL
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-4215-8P2T2S supports redundant ring technology and features strong, rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology,
Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system
reliability and uptime in various environments.
Built-in Unique PoE Functions for Powered Devices Management
As the industrial PoE+ managed switch for surveillance, wireless and VoIP networks, the
IGS-4215-8P2T2S features special PoE management functions:
■PDalivecheck
■Scheduledpowerrecycling
■PoEschedule
■PoEusagemonitoring
■PoEextension
Intelligent Powered Device Alive Check
The IGS-4215-8P2T2S can be configured to monitor connected PD (powered device)
status in real time via ping action. Once the PD stops working and responding, the IGS-
4215-8P2T2S will resume the PoE port power and bring the PD back to work. It will
greatly enhance the network reliability through the PoE port resetting the PD’s power
source and reducing the administrator’s management burden.
PD Alive Check
Restart PoE device if without response
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE
ON OFF
Restart PoE Device
Step 4
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
Alarm Notification
Scheduled Power Recycling
The IGS-4215-8P2T2S allows each of the connected PoE IP cameras or PoE wireless
access points to reboot at a specified time each week. Therefore, it will reduce the
chanceofIPcameraorAPcrashresultingfrombufferoverow.