IGS-4215-Series Quick Guide

4
2. Requirements
The Industrial Managed Switch provides local and remote login
interface for management purposes. The following equipment is
necessaryforfurthermanagement:
z Workstations running Windows XP/2003/Vista/7/8/10/2008/10,
MAC OS X or later, Linux, UNIX, or other platforms are compatible
withTCP/IPprotocols.
z Workstations are installed with Ethernet NIC (Network Interface
Card)
z Serial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-
RS232converter.
The above Workstations have been installed with terminal
emulator, such as Hyper Terminal included in Windows XP/2003,
putty or tera term.
 Serial cable -- one end is attached to the RS232 serial port,
while the other ends to the RJ45 console port of the Industrial
ManagedSwitch.
z Ethernet Port Connection
 Network cables --Use standard network (UTP) cableswith RJ45
connectors.
TheabovePCisinstalledwithWebbrowser.
Note
Itis recommendedto use InternetExplorer 8.0or above
to access the Industrial Managed Switch. If the Web
interface of the Industrial Managed Switch is not acces-
sible, please turn off the anti-virus software or firewall
andthentryitagain.