User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-4215 Series
Rising Threshold
Rising threshold value (0–2147483647)
Falling Threshold
Falling threshold value (0–2147483647)
Rising Event
Event to fire when the rising threshold is crossed
Falling Event
Event to fire when the falling threshold is crossed
Owner
Specify an owner for the alarm
Buttons
: Click to apply changes.
Figure 4-14-6: RMON Alarm Status Page Screenshot
The page includes the following fields:
Object Description
Index
Indicates the index of Alarm control entry
Sample Port
Displays the current sample port
Sample Variable
Displays the current sample variable
Sample Interval
Displays the current interval
Sample Type
Displays the current sample type
Rising Threshold
Displays the current rising threshold
Falling Threshold
Displays the current falling threshold
Rising Event
Displays the current rising event
Falling Event
Displays the current falling event
Owner
Displays the current owner
Action
Click
to delete RMON alarm entry
326