User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-4215 Series
Buttons
: Click to add ACE list.
Figure 4-10-8 IPv4-based ACE Table Page Screenshot
The page includes the following fields:
Object Description
ACL Name
Displays the current ACL name
Sequence
Displays the current sequence
Action
Displays the current action
Protocol
Displays the current protocol
Source IP Address
Displays the current source IP address
Source IP Address
Wildcard Mask
Displays the current source IP address wildcard mask
Destination IP Address
Displays the current destination IP address
Destination IP Address
Wildcard Mask
Displays the current destination IP address wildcard mask
Source Port Range
Displays the current source port range
Destination Port
Range
Displays the current destination port range
Flag Set
Displays the current flag set
DSCP
Displays the current DSCP
IP Precedence
Displays the current IP precedence
ICMP Type
Displays the current ICMP Type
ICMP Code
Displays the current ICMP code
Modify
Click
to edit IPv4-based ACL parameter
Click
to delete IPv4-based ACL entry
282