User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-4215 Series
Figure 4-6-11 CIST Port Status Page Screenshot
The page includes the following fields:
Object Description
Port
The switch port number of the logical STP port
Indentifier (Priority /
Port ID)
Displays the current indentifier (Priority / Port ID)
External Path Cost
Conf/Oper
Displays the current external path cost conf/oper
Internal Path Cost
Conf/Oper
Displays the current internal path cost/oper
Designated Root
Bridge
Displays the current designated root bridge
External Root Cost
Displays the current external root cost
Regional Root Bridge
Displays the current regional root bridge
Internal Root Cost
Displays the current internal root cost
Designated Bridge
Displays the current designated bridge
Internal Port Path Cost
Displays the current internal port path cost
Edge Port Conf/Oper
Displays the current edge port conf/oper
P2P MAC Conf/Oper
Displays the current P2P MAC conf/oper
Port Role
Displays the current port role
Port State
Displays the current port state
157