Quick Guide

9
6.ConguringIPAddressviatheConsole
TheIndustrialManagedPoE+SwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Industrial
ManagedPoE+Switch,pleaseusetheproceduresasfollows:
 Show the current IP address
1.Atthe“IGS-4215-8P2T2S#”prompt,enter“show ip”.
2.Thescreen displays the current IP address, subnet mask and gatewayas shown
inFigure6-1.
Figure 6-1: IP Information Screen
 ConguringIPaddress
3.Atthe“IGS-4215-8P2T2S #”prompt,enter“congure”.
4.At the “IGS-4215-8P2T2S (cong)#” prompt, enter the following command
andpress<Enter>asshowninFigure6-2.
IGS-4215-8P2T2S(cong)#ip address 192.168.1.100 mask 255.255.255.0
IGS-4215-8P2T2S(cong)#ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Industrial
ManagedPoE+Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254