Quick Guide
8
5. Logon to the Console
Once the terminal is connected to the device, power on the Industrial Managed
PoE+ Switch and the terminal will display “running testing procedures”. Then, the
following message asks to login user name and password. The factory default
user name and password are shown as follows, and the login screen in Figure 5-1
appears.
Note
The following console screen is based on the IGS-4215-8P2T2S.
Thedisplayof theIGS-4215-4P4TorIGS-4215-4P4T2Sisthesame
asthatoftheIGS-4215-8P2T2S.
Username:admin
Password:admin
Figure 5-1: Industrial Managed PoE+ Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed PoE+
Switch. For a detailed description of the commands, please refer to the following
chapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.