Datasheet

IGS-4215-4P4T2S
8
Specications
Product
IGS-4215-4P4T2S
HardwareSpecications
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
Compatible with 100BASE-FX SFP
PoE Injector Port 4 ports with 802.3af/802.3at PoE injector function (Port-1 to Port-4)
Console 1 x RS232-to-RJ45 serial port (115200,8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC
Power Requirements 48~56V DC, 3.5A (max.)
Power Consumption/ Dissipation
5.04 watts, 17.1BTU (Standby without PoE function)
8.96 watts, 30.5 BTU (Full loading without PoE function)
152.96 watts, 521.8 BTU (Full loading with PoE function)
Dimensions (W x D x H) 76 x 107 x 152 mm
Weight 1004g
Enclosure IP30 aluminum case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
LED
3 x LED for System and Power:
■Green:DCPower1
■Green:DCPower2
■Green:PowerFault
2 x LED for PoE Copper Port (Port-1~Port-4):
■Green:LNK/ACT
■Orange:PoE-in-use
2 x LED for 10/100/1000T Copper Port (Port-5~Port-8):
■Green:LNK/ACT
■Orange:1000Mbps
2 x LED for per mini-GBIC interface (Port-9 and Port-10)
■Green:LNK/ACT
■Orange:1000Mbps
4 x LED for PoE Power Usage (W)
■Orange:30,60,90and120W
Switching
Switch Architecture Store-and-Forward
Switch Fabric 20Gbps/non-blocking
Switch Throughput@64 bytes 14.8Mpps @64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10 Kbytes
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply Type End-span
PoE Power Output
IEEE 802.3af Standard
- Per port 48V~56V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 50V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 144 watts (depending on power input)
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 4
PoE Management Functions
PoE Management
PD Alive Check
Scheduled Power Recycling
PoE Schedule
PoE Usage Monitoring
PoE Extension