Datasheet

3
IGS-4215-4P4T2S
Security
• Storm Control support
– Broadcast/unknown unicast/unknown multicast
• Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– DHCP Option 82
– RADIUS/TACACS+ authentication
• Access Control List
– IPv4/IPv6 IP-based ACL
– IPv4/IPv6 IP-based ACE
– MAC-based ACL
– MAC-based ACE
• MAC Security
– Static MAC
– MACltering
• PortsecurityforsourceMACaddressentriesltering
• DHCPsnoopingtolterdistrustedDHCPmessages
• Dynamic ARP inspection discards ARP packets with invalid
MAC address to IP address binding
• IPsourceguardpreventsIPspoongattacks
• DoS attack prevention
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
– Web switch management
– Console/Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMPv3 secure access
• SNMP Management
– SNMPtrapforinterfaceLinkUpandLinkDownnotication
– Four RMON groups (history, statistics, alarms and events)
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Congurationupload/downloadthroughHTTP/TFTP
– Dual images
– Hardware reset button for system reboot or reset to factory
default
Scheduled Power Recycling
The IGS-4215-4P4T2S allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specific time each week. Therefore, it will
reducethechanceofIPcameraorAPcrashresultingfrombufferoverow.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection, the IGS-4215-4P4T2S can effectively control the power supply besides
its capability of giving high watts power. The “PoE schedule” function helps you
to enable or disable PoE power feeding for each PoE port during specified time
intervals and it is a powerful function to help SMBs or enterprises save power and
budget. It also increases security by powering off PDs that should not be in use
during non-business hours.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE
Usage
Via the power usage chart in the web management interface, the IGS-4215-
4P4T2S enables the administrator to monitor the status of the power usage of the
connected PDs in real time. Thus, it greatly enhances the management efficiency
of the facilities. Moreover, the IGS-4215-4P4T2S helps users to monitor the current
Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours
Total Saved = 10800watts/month
6 Watts 6 Watts 12 Watts 12 Watts
PoE Schedule
08:00~17:00 17:00~08:00
6 Watts 6 Watts 12 Watts 12 Watts
OFF OFF OFF
ON ON ON ON ON