Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial Power over EthernetIndustrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch

IGS-4215-4P4T2S

Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T +

2-Port 100/1000X SFP Managed Switch (-40~75 degrees C)

Ideal, Cost-effective, Manageable PoE Solution for Hardened Environment

Designed to be installed in heavy industrial demanding environments, the IGS-

4215-4P4T2S is the new generation of PLANET Industrial-grade, DIN-rail type L2/

L4 Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to

improve the availability of critical business applications. It provides IPv6/IPv4 dual

stack management and built-in L2/L4 Gigabit switching engine along with 4

10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+, 4 additional Gigabit

copper ports and another 2 extra 100/1000BASE-X SFP ber slots for data and

video uplink. The IGS-4215-4P4T2S is able to operate reliably, stably and quietly

in any environment without affecting its performance. It comes with a total power

budget of up to 144 watts for different kinds of PoE applications and operating

temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.

Physical Port

• 8-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port

IEEE 802.3at/af PoE Injector (Port-1 to Port-4)

• 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto

detection

• RJ45 console interface for switch basic management and

setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 4 ports of IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters in standard mode

and 250m in extend mode

• PoE management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limitation

– PDclassicationdetection

– PD alive-check

– PoE schedule

Industrial Case & Installation

• IP30 aluminum case

• DIN-rail and wall-mount design

• Supports -40 to 75 degrees C operating temperature

• Supports ESD 6KV DC Ethernet protection

• Redundant power design

– 48V~56V DC wide power input with reverse polarity

protection

• Provides one relay output for power failure

Switching

• Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full

duplex), auto-negotiation and auto MDI/MDI-X

Cybersecurity Network Solution to Minimize Security Risks

The IGS-4215-4P4T2S supports SSHv2 and TLS protocols to provide strong

protection against advanced threats. It includes a range of cybersecurity features

such as DHCP Snooping, IP Source Guard, dynamic ARP Inspection Protection,

802.1x port-based network access control, RADIUS and TACACS+ user accounts

management, SNMPv3 authentication, and so on to complement it as an all-

security solution.

Summary of content (11 pages)

PAGE 1
IGS-4215-4P4T2S Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C) Physical Port • 8-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port-1 to Port-4) • 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection • RJ45 console interface for switch basic management and setup Power over Ethernet • Complies with IEEE 802.
PAGE 2
IGS-4215-4P4T2S • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • IEEE 802.
PAGE 3
IGS-4215-4P4T2S Step 1 PT PoE Camera PD Status Good!! Security Step 2 • Storm Control support No Response...... –– Broadcast/unknown unicast/unknown multicast Ping Request • Authentication Ping Request Ping Echo Check alive status for 3 times –– IEEE 802.
PAGE 4
IGS-4215-4P4T2S status of PoE power usage easily and efficiently via its advanced LED indication. • SNTP Network Time Protocol Called “PoE Power Usage”, the front panel of the IGS-4215-4P4T2S has four LED • Network Diagnostic indicators of different power usages.
PAGE 5
IGS-4215-4P4T2S Robust Layer 2 Features The IGS-4215-4P4T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the IGS-4215-4P4T2S allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well.
PAGE 6
IGS-4215-4P4T2S Intelligent SFP Diagnosis Mechanism The IGS-4215-4P4T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. SFP DDM (Digital Diagnostic Monitor) Ammeter Voltage Temperature Power Receiver Power Transceiver Applications ITU-T G.
PAGE 7
IGS-4215-4P4T2S Industrial-grade PoE Switch for Building Automation & Security Suitable for buildings where security is strictly to be enforced, the IGS-4215-4P4T2S, with 4 PoE, in-line power interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment.
PAGE 8
IGS-4215-4P4T2S Specifications Product IGS-4215-4P4T2S Hardware Specifications Copper Ports SFP/mini-GBIC Slots 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10) Compatible with 100BASE-FX SFP PoE Injector Port 4 ports with 802.3af/802.
PAGE 9
IGS-4215-4P4T2S Active PoE Device Live Detection Yes PoE Power Recyclinge Yes, daily or predefined schedule PoE Schedule 4 schedule profiles PoE Extend Mode Yes, max. up to 250 meters Layer 2 Functions Port Mirroring TX/RX/Both Many-to-1 monitor 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) VLAN Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN Link Aggregation IEEE 802.
PAGE 10
IGS-4215-4P4T2S RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB v2 SNMP MIBs RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB Power over Ethernet MIB Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) Standards Compliance IEEE 802.3 10BASE-T IEEE 802.3at Power over Ethernet Plus IEEE 802.
PAGE 11
IGS-4215-4P4T2S Ordering Information Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch IGS-4215-4P4T2S (-40~75 degrees C) Related Products Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch IGS-4215-8P2T2S (-40~75 degrees C) IGS-4215-4P4T Industrial 4-Port 10/100/1000T 802.