Quick Guide

8
6.ConguringIPAddressviatheConsole
TheIndustrialManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch,please
usetheproceduresasfollows:
 Show the current IP address
1.Atthe“IGS-4215-4P4T#”prompt,enter“show ip”.
2.Thescreen displays the current IP address, subnet mask and gateway as shown
inFigure6-1.
Figure 6-1: IP Information Screen
 ConguringIPaddress
3.Atthe“IGS-4215-4P4T#”prompt,enter“congure”.
4.Atthe “IGS-4215-4P4T (cong)#” prompt, enter the following command and
press <Enter>asshowninFigure6-2.
IGS-4215-4P4T(cong)# ip address 192.168.1.100 mask 255.255.255.0
IGS-4215-4P4T(cong)# ip default-gateway 192.168.1.254
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254