Quick Guide
7
5. Logon to the Console
Once the terminal is connected to the device, power on the Industrial Managed
Switch, and the terminal will display “running testing procedures”. Then, the
following message asks to log-in user name and password. The factory default
user name and password are shown as follows, and the login screen in Figure 5-1
appears.
Username:admin
Password:admin
Figure 5-1: Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
adetaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For securityreason, pleasechange andmemorize thenew pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.