Datasheet

7
IGS-4215-4P4T
IGS-4215-4P4T2S
Specications
Product
IGS-4215-4P4T IGS-4215-4P4T2S
HardwareSpecications
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots NA
2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
Compatible with 100BASE-FX SFP
PoE Injector Port 4 port with 802.3af/802.3at PoE injector function (Port-1 to Port-4)
Console 1 x RS232-to-RJ45 serial port (115200,8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps/non-blocking 20Gbps/non-blocking
Switch Throughput@64 bytes 11.9Mpps @64 bytes 14.8Mpps @64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10 Kbytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
3 x LED for System and Power:
■Green:DCPower1
■Green:DCPower2
■Green:PowerFault
2 x LED for PoE Copper Port (Port-1~Port-4):
■Green:LNK/ACT
■Orange:PoE-in-use
2 x LED for 10/100/1000T Copper Port (Port-5~Port-8):
■Green:LNK/ACT
■Orange:1000Mbps
2 x LED for per mini-GBIC interface (Port-9 and Port-10)(IGS-4215-4P4T2S)
■Green:LNK/ACT
■Orange:1000Mbps
4 x LED for PoE Power Usage (W)
■Orange:30,60,90and120W
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC
Power Requirements 48~56V DC, 3.5A (max.)
Power Consumption/ Dissipation
5.04 watts, 17.1BTU
(Standby without PoE function)
7.28 watts, 23 BTU
(Full loading without PoE function)
151.28 watts, 516.1 BTU
(Full loading with PoE function)
5.04 watts, 17.1BTU
(Standby without PoE function)
8.96 watts, 30.5 BTU
(Full loading without PoE function)
152.96 watts, 521.8 BTU
(Full loading with PoE function)
Dimensions (W x D x H) 161 x 107 x 72 mm
Weight 1001g 1004g
ESD Protection 6KV DC
Enclosure IP30 aluminum case
Installation DIN-rail kit and wall-mount ear
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply Type End-span
PoE Power Output
IEEE 802.3af Standard
- Per port 48V~56V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 50V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 144 watts (depending on power input)
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 4