Datasheet

IGS-4215-4P4T
IGS-4215-4P4T2S
1
Ideal, Cost-effective, Manageable PoE Solution for Hardened
Environment
Designed to be installed in heavy industrial demanding environments, the IGS-
4215 series are the new generation of PLANET Industrial-grade, DIN-rail type L2/
L4 Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to
improve the availability of critical business applications. It provides IPv6/IPv4 dual
stack management and built-in L2/L4 Gigabit switching engine along with 4
10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+, 4 additional Gigabit
copper ports and another 2 extra 100/1000BASE-X SFP fiber slots (IGS-4215-
4P4T2S) for data and video uplink. The IGS-4215 series are able to operate
reliably, stably and quietly in any environment without affecting its performance.
It comes with a total power budget of up to 144 watts for different kinds of PoE
applications and operating temperature ranging from -40 to 75 degrees C in a
rugged IP30 metal housing.
Industrial L2/L4 Managed Gigabit Switch with
4-Port 802.3at PoE+
Physical Port
• 8-port 10/100/1000BASE-T Gigabit RJ45 copper with
4-port IEEE 802.3at/af PoE Injector (Port-1 to Port-4)
• 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto
detection (For IGS-4215-4P4T2S)
• RJ45 console interface for switch basic management and
setup
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus,
end-span PSE
• Backward compatible with IEEE 802.3af Power over
Ethernet
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE management
Total PoE power budget control
Per port PoE function enable/disable
PoE port power feeding priority
Per PoE port power limitation
PDclassicationdetection
PD alive-check
PoE schedule
Industrial Case & Installation
• IP30 aluminum metal case protection
• DIN-rail and wall-mount design
• Supports -40 to 75 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Redundant power design
48V~56V DC wide power input
Switching
• Hardware based 10/100Mbps (half/full duplex), and
1000Mbps(fullduplex)mode,owcontrolandauto-
negotiation and auto MDI/MDI-X
• FeaturesStore-and-Forwardmodewithwire-speedltering
and forwarding rates
• IEEE802.3xowcontrolforfullduplexoperationandback
pressure for half duplex operation

Summary of content (12 pages)