User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-4215 Series
337
• Falling Threshold
Falling threshold value (0–2147483647).
• Rising Event
Event to fire when the rising threshold is crossed.
• Falling Event
Event to fire when the falling threshold is crossed.
• Owner
Specify an owner for the alarm.
Buttons
: Click to apply changes.
Figure 4-14-6: RMON Alarm Status Page Screenshot
The page includes the following fields:
Object Description
• Index
Indicates the index of Alarm control entry.
• Sample Port
Displays the current sample port.
• Sample Variable
Displays the current sample variable.
• Sample Interval
Displays the current interval.
• Sample Type
Displays the current sample type.
• Rising Threshold
Displays the current rising threshold.
• Falling Threshold
Displays the current falling threshold.
• Rising Event
Displays the current rising event.
• Falling Event
Displays the current falling event.
• Owner
Displays the current owner.
• Action
Click
to delete RMON alarm entry.