User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-4215 Series
4.9.4.2 Enable List
This page is to login list parameters. The authentication list screens in Figure 4-9-19 & Figure 4-9-20 appear.
Figure 4-9-19 New Authentication List Screenshot
The page includes the following fields:
Object Description
List Name
Defines a name for the authentication list
Method 1-3
Set the login authentication method:
Empty / None / Enable / TACACS+ / RADIUS
Buttons
: Click to add authentication list.
Figure 4-9-20 Login Authentication List Screenshot
The page includes the following fields:
Object Description
List Name
Displays the current list name
Method List
Displays the current method list
Modify
Click
to edit login authentication list parameter
Click
to delete login authentication list entry
230