User's Manual

User’s Manual of IGS-4215 Series
1.5 Product Specifications
IGS-4215-4P4T / IGS-4215-4P4T2S
Product IGS-4215-4P4T IGS-4215-4P4T2S
Hardware Specifications
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots NA
2 1000BASE-SX/LX/BX SFP interfaces
(Port-9 and Port-10)
Compatible with 100BASE-FX SFP
PoE Injector Port 4 port with 802.3af/802.3at PoE injector function (Port-1 to Port-4)
Console 1 x RS232-to-RJ45 serial port (115200,8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps/non-blocking 20Gbps/non-blocking
Switch Throughput@64 bytes 11.9Mpps @64 bytes 14.8Mpps @64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10 Kbytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
3 x LED for System and Power:
 Green: DC Power 1
 Green: DC Power 2
 Green: Power Fault
2 x LED for PoE Copper Port (Port-1~Port-4):
 Green: LNK/ACT
 Orange: PoE -in-use
2 x LED for 10/100/1000T Copper Port (Port-5~Port-8):
 Green: LNK/ACT
 Orange: 1000Mbps
2 x LED for per mini-GBIC interface (Port-9 and Port-10)(IGS-4215-4P4T2S)
 Green: LNK/ACT
 Orange: 1000Mbps
4 x LED for PoE Power Usage (W)
 Orange: 30, 60, 90 and 120W
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm
One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC
20