User's Manual

User’s Manual of IGS-4215 Series
1.4 Product Features
Physical Port
■ 8-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-pPort IEEE 802.3at / af PoE Injector (Port-1 to Port-4)
■ 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection (For IGS-4215-4P4T2S)
■ RJ45 console interface for switch basic management and setup
Power over Ethernet
■ Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
■ Backward compatible with IEEE 802.3af Power over Ethernet
■ Up to 4 ports of IEEE 802.3af/802.3at devices powered
■ Supports PoE power up to 36 watts for each PoE port
■ Auto detects powered device (PD)
■ Circuit protection prevents power interference between ports
■ Remote power feeding up to 100 meters
■ PoE management
 Total PoE power budget control
 Per port PoE function enable/disable
 PoE port power feeding priority
 Per PoE port power limitation
 PD classification detection
 PD alive-check
 PoE schedule
Industrial Case & Installation
■ IP30 aluminum metal case protection
■ DIN-rail and wall-mount design
■ Supports -40 to 75 degrees C operating temperature
■ Supports ESD 6KV DC Ethernet protection
■ Redundant power design
 48V~56V DC wide power input
Switching
■ Hardware based 10/100Mbps (half/full duplex), and 1000Mbps (full duplex) mode, flow control and auto-negotiation
and auto MDI/MDI-X
■ Features Store-and-Forward mode with wire-speed filtering and forwarding rates
■ IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
■ 8K MAC address table size
■ 10K jumbo frame
■ Automatic address learning and address aging
■ Supports CSMA/CD protocol
Layer 2 Features
■ Supports VLAN
17