User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-4215 Series
PoE Schedule for Energy Sav
ing
Under the trend of energy saving worldwide and contributing to environmental protection, the IGS-4215 series can effectively
control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or
disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or
enterprises save power and budget. It also increases security by powering off PDs that should not be in use during
non-business hours.
PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage
Via the power usage chart in the web management interface, the IGS-4215 series enables the administrator to monitor the
status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the
facilities. Moreover, the IGS-4215 series helps users to monitor the current status of PoE power usage easily and efficiently via
its advanced LED indication. Called “PoE Power Usage”, the front panel of the IGS-4215 series has four LED indicators of
different power usages.
Environmentally Hardened Design
With the IP30 aluminum industrial case, the IGS-4215 series provides a high level of immunity against electromagnetic
interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air
conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215 series can be placed in
almost any difficult environment.
13