User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-4215 Series
4.3.10.1 SFP Module Detail Status
The SFP Module Detail Status screen in Figure 4-3-22 appears.
Figure 4-3-22 SFP Module Detail Status Page Screenshot with Sample Switch
The page includes the following fields:
Object Description
Port
The logical port for the settings contained in the same row
Temperature
Displays the current SFP temperature
Voltage
Displays the current SFP voltage
Current
Displays the current SFP current
Output Power
Displays the current SFP output power
Input Power
Displays the current SFP input power
Transmit Fault
Displays the current SFP transmits fault
Loss of Signal
Displays the current SFP loss of signal.
Rate Ready
Displays the current SFP rate ready.
102