Datasheet

IGS-4215-4P4T
IGS-4215-4P4T2S
3
PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE
Usage
Via the power usage chart in the web management interface, the IGS-4215
series enables the administrator to monitor the status of the power usage of the
connected PDs in real time. Thus, it greatly enhances the management efficiency
of the facilities. Moreover, the IGS-4215 series helps users to monitor the current
status of PoE power usage easily and efficiently via its advanced LED indication.
Called “PoE Power Usage”, the front panel of the IGS-4215 series has four LED
indicators of different power usages.
Environmentally Hardened Design
With the IP30 aluminum industrial case, the IGS-4215 series provides a high level
of immunity against electromagnetic interference and heavy electrical surges which
are usually found on plant floors or in curb-side traffic control cabinets without air
conditioner. Being able to operate under the temperature range from -40 to 75
degreesC,theIGS-4215seriescanbeplacedinalmostanydifcultenvironment.
IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the IGS-4215 series helps the system
integrators to step in the IPv6 era with the lowest investment as its network
facilities need not be replaced or overhauled if the IPv6 network is set up.
• Access Control List
–
IPv4/IPv6 IP-based ACL
–
IPv4/IPv6 IP-based ACE
–
MAC-based ACL
–
MAC-based ACE
• MAC Security
–
Static MAC
–
MACltering
• PortsecurityforsourceMACaddressentriesltering
• DHCPsnoopingtolterdistrustedDHCPmessages
• Dynamic ARP inspection discards ARP packets with invalid
MAC address to IP address binding
• IPsourceguardpreventsIPspoongattacks
• DoS attack prevention
• SSH / SSL
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
–
IPv4/IPv6 Web switch management
–
Console and Telnet Command Line Interface
–
SNMP v1, v2c, and v3
–
SSH and SSL secure access
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
–
Firmware upload/download via HTTP/TFTP
–
Congurationupload/downloadthroughHTTP/TFTP
–
Hardware reset button for system reboot or reset to
factory default
–
Dual images
• SNTP Network Time Protocol
• Cable diagnostics
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-
MED
• SNMPtrapforinterfaceLinkUpandLinkDownnotication
• Event message logging to remote syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET Smart Discovery Utility