Datasheet

IGS-4215-4P4T
2
Layer 2 Features
• Supports VLAN
IEEE 802.1Q tagged VLAN
Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
Protocol VLAN
Voice VLAN
Private VLAN (Protected port)
Management VLAN
GVRP
• Supports Spanning Tree Protocol
STP (Spanning Tree Protocol)
RSTP (Rapid Spanning Tree Protocol)
MSTP (Multiple Spanning Tree Protocol)
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
Maximum 4 trunk groups, up to 4 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
Quality of Service
• Ingress/Egress Rate Limit per port bandwidth control
• Trafcclassication
IEEE 802.1p CoS
TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
• Supports IPv4 IGMP snooping v2, v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
Security
• Storm Control support
Broadcast/unknown unicast/unknown multicast
• Authentication
IEEE 802.1X port-based network access authentication
Built-in RADIUS client to cooperate with the RADIUS
servers
DHCP Option 82
RADIUS/TACACS+ authentication
• Access Control List
IPv4/IPv6 IP-based ACL
IPv4/IPv6 IP-based ACE
MAC-based ACL
MAC-based ACE
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-4215-4P4T supports redundant ring technology and features strong, rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology,
Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system
reliability and uptime in various environments.
ERPS Ring for Video Transmission Redundancy
IGS-4215-4P4T2S
IGS-4215-4P4T
IGS-20160HPT
Network Video
Recorder
Traffic Control Center
1000
1000
1000
1000
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
PoE
PoE
PoE
PoE
PoE
PoE
Outdoor
PoE IP Camera
1000BASE-SX/LX Fiber Optic
1000
PoE
1000BASE-T UTP with PoE
Built-in Unique PoE Functions for Powered Devices Management
As it is the managed PoE switch for surveillance, wireless and VoIP networks, the IGS-
4215-4P4T features the following special PoE management functions:
■PDalivecheck
■Scheduledpowerrecycling
■PoEschedule
■PoEusagemonitoring
■PoEextension
Intelligent Powered Device Alive Check
The IGS-4215-4P4T can be configured to monitor connected PD (Powered Device)
status in real time via ping action. Once the PD stops working and responding, the IGS-
4215-4P4T will resume the PoE port power and bring the PD back to work. It will greatly
enhance the network reliability through the PoE port resetting the PD’s power source
and reducing administrator management burden.