Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial Power over EthernetIndustrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T Managed Switch (-40~75 degrees C)

IGS-4215-4P4T

Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port

10/100/1000T Managed Switch

Ideal, Cost-effective, Manageable PoE Solution for Hardened Environment

Designed to be installed in heavy industrial demanding environments, the IGS-

4215-4P4T is the new generation of PLANET Industrial-grade, DIN-rail type L2/

L4 Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to

improve the availability of critical business applications. It provides IPv6/IPv4 dual

stack management and built-in L2/L4 Gigabit switching engine along with 4

10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+ and 4 additional Gigabit

copper ports. The IGS-4215-4P4T is able to operate reliably, stably and quietly in any

environment without affecting its performance. It comes with a total power budget of up

to 144 watts for different kinds of PoE applications and operating temperature ranging

from -40 to 75 degrees C in a rugged IP30 metal housing.

Physical Port

• 8-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port

IEEE 802.3at/af PoE Injector function (Port-1 to Port-4)

• RJ45 console interface for switch basic management and

setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 4 ports of IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters in standard mode

and 250m in extend mode

• PoE management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limitation

– PDclassicationdetection

– PD alive-check

– PoE schedule

Industrial Case and Installation

• IP30 aluminum case

• DIN-rail and wall-mounted designs

• Supports -40 to 75 degrees C operating temperature

• Supports ESD 6KV DC Ethernet protection

• Redundant power design

– 48V~56V DC wide power input

• Provides one relay output for power failure

Switching

• Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full

duplex), auto-negotiation and auto MDI/MDI-X

• FeaturesStore-and-Forwardmodewithwire-speedltering

and forwarding rates

• IEEE802.3xowcontrolforfullduplexoperationandback

pressure for half duplex operation

• 8K MAC address table size

• 10K jumbo frame

• Automatic address learning and address aging

• Supports CSMA/CD protocol

Cybersecurity Network Solution to Minimize Security Risks

The IGS-4215-4P4T supports SSHv2 and TLS protocols to provide strong protection

against advanced threats. It includes a range of cybersecurity features such as DHCP

Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based

network access control, RADIUS and TACACS+ user accounts management, SNMPv3

authentication, and so on to complement it as an all-security solution.

Summary of content (11 pages)

PAGE 1
IGS-4215-4P4T Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T Managed Switch Physical Port • 8-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector function (Port-1 to Port-4) • RJ45 console interface for switch basic management and setup Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, endspan PSE • Backward compatible with IEEE 802.3af Power over Ethernet • Up to 4 ports of IEEE 802.3af/802.
PAGE 2
IGS-4215-4P4T Layer 2 Features • Supports VLAN –– IEEE 802.1Q tagged VLAN –– Provider bridging (VLAN Q-in-Q, IEEE 802.
PAGE 3
IGS-4215-4P4T PD Alive Check Step 1 Step 2 PoE Device Status Good!! • MAC Security Checking alive status for 3 times Ping Request –– Static MAC –– MAC filtering • Port security for source MAC address entries filtering Ping Request • DHCP snooping to filter distrusted DHCP messages Ping Echo Step 3 No Response! Restart PoE device if without response Step 4 MAC address to IP address binding Restart PoE Device Alarm Notification • IP source guard prevents IP spoofing attacks PoE ON • Dynamic
PAGE 4
IGS-4215-4P4T PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage Via the power usage chart in the web management interface, the IGS-4215-4P4T enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the IGS-4215-4P4T helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication.
PAGE 5
IGS-4215-4P4T IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the IGS-4215-4P4T helps the system integrators to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 network is set up. Robust Layer 2 Features The IGS-4215-4P4T can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.
PAGE 6
IGS-4215-4P4T Friendly and Secure Management For efficient management, the IGS-4215-4P4T is equipped with Command line, Web and SNMP management interfaces. ■ With the built-in Web-based management interface, the IGS-4215-4P4T offers an easy-to-use, platform-independent management and configuration facility. ■ For text-based management, it can be accessed via Telnet and the console port. ■ By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software.
PAGE 7
IGS-4215-4P4T Industrial-grade PoE Switch for Building Automation & Security Suitable for buildings where security is strictly to be enforced, the IGS-4215-4P4T, with 4 PoE, in-line power interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment.
PAGE 8
IGS-4215-4P4T Specifications Product IGS-4215-4P4T Hardware Specifications Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports PoE Injector Port 4 ports with 802.3af/802.3at PoE injector function (Port-1 to Port-4) Console 1 x RS232-to-RJ45 serial port (115200,8, N, 1) Reset Button Connector < 5 sec: System reboot > 5 sec: Factory default Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Alarm One relay output for power failure.
PAGE 9
IGS-4215-4P4T Layer 2 Functions Port Mirroring TX/RX/Both Many-to-1 monitor 802.1Q tagged VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) VLAN Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN Link Aggregation IEEE 802.3ad LACP and static trunk Supports 4 groups with 4 ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.
PAGE 10
IGS-4215-4P4T Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) Standards Compliance IEEE 802.3 10BASE-T IEEE 802.3az for Energy-Efficient Ethernet IEEE 802.3u 100BASE-TX RFC 768 UDP IEEE 802.3ab Gigabit 1000BASE-T RFC 783 TFTP IEEE 802.3x Flow Control and Back Pressure RFC 793 TCP IEEE 802.3ad Port Trunk with LACP RFC 791 IP IEEE 802.
PAGE 11
IGS-4215-4P4T Ordering Information IGS-4215-4P4T Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T Managed Switch Related Products IGS-4215-4P4T2S IGS-4215-8P2T2S Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C) Industrial 8-Port 10/100/1000T 802.