Datasheet
IGS-4215-16T2S
6
Specications
Product
IGS-4215-16T2S
HardwareSpecications
Copper Ports 16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Gigabit SFP Slots 2 100/1000BASE-SX/LX/BX SFP interfaces
Console 1 RJ45 serial port (115200,8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 36Gbps (non-blocking)
Switch Throughput@64 bytes 26.79Mpps@ 64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1Mbits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 10 Kbytes
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
System
■Green: Power 1
■Green: Power 2
■Red: Power Fault
Per 10/100/1000T RJ45 Ports
■Green: 1000 LNK/ACT
■Orange: 10/100 LNK/ACT
Per SFP Interface
■Green: 1000 LNK/ACT
■Orange: 100 LNK/ACT
Connector
Removable 6-pin terminal block for power input
- Pin 1/2 for Power 1
- Pin 3/4 for fault alarm
- Pin 5/6 for Power 2
Alarm
One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V DC
Power Requirements
Dual 12~48V DC
24V AC
Power Consumption
DC input:
Max. 3.4 watts/11.6BTU (System on)
Max. 12.5 watts/42.7BTU (Full loading)
AC input:
Max. 6 watts/20.5BTU (System on)
Max. 15 watts/51.2BTU (Full loading)
Dimensions (W x D x H) 66 x 107 x 152 mm
Weight 813g
Layer 2 Functions
Port Mirroring
TX/RX/Both
Many-to-1 monitor
Up to 4 sessions
VLAN
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Link Aggregation
IEEE 802.3ad LACP and static trunk
Cisco ether-channel (Static Trunk)
Up to 8 trunk groups
Up to 8 ports per trunk group with 16Gbps bandwidth
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU Guard, BPDU Filtering and BPDU Forwarding