(V3) Datasheet

4
IGS-20160HPT
• Source MAC / IP address binding
• DHCP Snoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IP Source GuardpreventsIPspoongattacks
• IPaddressaccessmanagementtopreventunauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Web switch management
– Console/Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP
– Reset button for system reboot or reset to factory default
– Dual Images
• DHCP Relay
• DHCP Option82
• DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• UPnP
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• IEEE 802.3ah OAM
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Network Diagnostic
– SFP-DDM (Digital Diagnostic Monitor)
– ICMPv6/ICMPv4 Remote Ping
– Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMPtrapforinterfaceLinkupandLinkdownnotication
• System Log
• PLANET NMS System and Smart Discovery Utility for
deployment management
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the IGS-20160HPT can effectively control the power
supply besides its capability of giving high watts power. The built-in “PoE schedule”
function helps you to enable or disable PoE power feeding for each PoE port
during specified time intervals and it is a powerful function to help SMBs or
enterprises save power and money.
PoE
1000BASE-TX UTP with PoE
6 Watts 6 Watts 12 Watts 12 Watts
Total Consumption of 36 watts/hr
PoE
PoE PoE
PoE
Power
On
Power
On
Power
On
Power
On
5 PM8 AM
5 PM 8 AM
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts/hr during off-business hours
PoE PoE
Total Saved = 10800 watts/month
PoE PoE
Power
On
Power
Off
Power
Off
Power
Off
Scheduled Power Recycling
The IGS-20160HPT allows each of the connected PoE IP cameras or PoE wireless
access points to reboot at a specific time each week. Therefore, it will reduce the
chanceofIPcameraorAPcrashresultingfrombufferoverow.
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
SMTP/SNMP Trap Event Alert
The IGS-20160HPT provides event alert function to help to diagnose the abnormal
device owing to whether or not there is a break of the network connection, or the
rebooting response.
SMTP/SNMP Trap Event Alert
PoE PoE
Malfunction
E-mail Alert
IP Camera IP Camera
IGS-20160HPT