(V3) Datasheet

3
IGS-20160HPT
• Compatible with Cisco Uni-directional link detection (UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Link Layer Discovery Protocol (LLDP)
• Provides ONVIF for co-operating with PLANET video IP
surveillances
Layer 3 IP Routing Features
• Supportsmaximum128staticroutesandroutesummarization
• IPv4 dynamic routing protocol supports OSPFv2
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
IEEE 802.1p CoS
IP TOS/DSCP/IP precedence
IP TCP/UDP port number
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4IGMPsnoopingportltering
• IPv6MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
IEEE 802.1x port-based / MAC-based network access
authentication
Built-in RADIUS client to co-operate with the RADIUS
servers
TACACS+ login users access authentication
RADIUS / TACACS+ users access authentication
• Access Control List
IP-based Access Control List (ACL)
MAC-based Access Control List
High Power PoE for Security and Public Service Applications
As the whole system comes with a total 320-watt PoE budget, the IGS-20160HPT
is designed specifically to satisfy the growing demand of higher power consuming
network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless
LANaccesspoints,PTZ(pan,tilt,zoom)speeddomenetworkcamerasandother
PoE network devices.
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has developed an awesome feature -- ONVIF Support -- which is
specifically designed for co-operating with video IP surveillances. From the IGS-
20160HPT GUI, clients just need one click to search and show all of the ONVIF
devices via network application. In addition, clients can upload floor images to the
switch series, making the deployments of surveillance and other devices easy for
planning and inspection purposes. Moreover, clients can get real-time surveillance’s
informationandonline/ofinestatus;thePoErebootcanbecontrolledfromtheGUI.
Intelligent Alive Check for Powered Device
The IGS-20160HPT can be configured to monitor connected PD’s status in
real time via ping action. Once the PD stops working and responding, the IGS-
20160HPT will recycle the PoE port power and bring the PD back to work. It also
greatly enhances the reliability in that the PoE port will reset the PD power, thus
reducing administrator’s management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification