Datasheet

2
IGS-20160HPT
• 48~56V DC, redundant power with reverse polarity
protection
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input & Digital Output
• 2 digital input (DI)
• 2 digital output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture, and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
– Broadcast/Multicast/Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 4K VLANs groups, out of 4094 VLAN IDs
– Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Port Isolation
– MAC-based VLAN
– IP Subnet-based VLAN
– Protocol-based VLAN
– VLAN Translation
– Voice VLAN
– GVRP
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Filtering/BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 10 trunk groups with 4 ports per trunk group
– Up to 8Gbps bandwidth (duplex mode)
• Provides port mirror (1-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
Cybersecurity Network Solution to Minimize Security Risks
The IGS-20160HPT supports SSHv2 and TLS protocols to provide strong
protection against advanced threats. It includes a range of cybersecurity features
such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x
port-based and MAC-based network access control, RADIUS and TACACS+ user
accounts management, SNMPv3 authentication, and so on to complement it as an
all-security solution.
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-20160HPT supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant
power input system into customer’s industrial automation network to enhance
system reliability and uptime in harsh factory environments. In a simple Ring
network, the recovery time of data link can be as fast as 10ms.
ERPS Ring for Video Transmission Redundancy
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
Outdoor
PoE IP Camera
1000BASE-SX/LX Fiber-optic
1000
PoE
1000BASE-T UTP with PoE
1000
1000
1000
1000
Recovery time <10ms
IGS-20160HPT
IGS-20160HPT
IGS-20160HPT
Network Video
Recorder
Traffic Control Center
PoE
PoE
PoE
PoE
PoE
PoE