Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial EthernetIndustrial L3 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch

IGS-20160HPT

Industrial L3 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T +

2-Port 1G/2.5G SFP Managed Ethernet Switch (-40~75 degrees C)

Advanced Manageable PoE Solution for Hardened Environment

PLANET IGS-20160HPT L3 Industrial Managed PoE+ Switch, featuring 16

10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts,

and 100/1000/2500BASE-X SFP ports in an IP30 rugged metal case, can be

installed in any difficult environment. It provides user-friendly yet advanced IPv6/

IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3

OSPFv2 dynamic routing capability, and advanced ITU-G.8032 ERPS Ring

technology to improve the rapid self-recovery capability and PLANET intelligent

PoE functions for controlling the PoE outdoor IP surveillance and wireless network

applications. It is able to operate reliably, stably and quietly in the temperature

range from -40 to 75 degrees C.

Physical Port

• 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with

IEEE 802.3at PoE+ Injector

• 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports

• 2 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type

auto detection

• One RJ45 console interface for basic management and setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-

span PSE

• Up to 16 IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100m in standard mode; 250m

in extended mode at speed of 10Mbps

• PoE management features

– PoE admin-mode control

– PoE management mode selection

– PoE Legacy mode selection

– PoE Budget setup option

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limit

– PoE Port Status monitoring

– PDclassicationdetection

– Sequence port PoE

• Intelligent PoE features

– Temperature threshold control

– PoE usage threshold control

– PoE extension

– PoE schedule

– PD alive check

– LLDP PoE Neighbors

Industrial Protocol

• Modbus TCP for real-time monitoring in the SCADA system

• IEEE 1588v2 PTP (Precision Time Protocol)

Industrial Case & Installation

• IP30 aluminum case

• DIN-rail or wall-mount design

Layer 3 Dynamic Routing Support

The IGS-20160HPT enables the administrator to conveniently boost network

efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the

OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior

dynamic routing protocol for autonomous system based on link state. The protocol

creates a database for link state by exchanging link states among Layer3 switches,

and then uses the Shortest Path First algorithm to generate a route table based on

that database.

Summary of content (14 pages)

PAGE 1
IGS-20160HPT Industrial L3 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch (-40~75 degrees C) Physical Port • 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector • 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports • 2 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection • One RJ45 console interface for basic management and setup Power over Ethernet • Complies with IEEE 802.
PAGE 2
IGS-20160HPT • 48~56V DC, redundant power with reverse polarity protection • Supports 6KV DC Ethernet ESD protection • -40 to 75 degrees C operating temperature Digital Input & Digital Output • 2 digital input (DI) • 2 digital output (DO) • Integrate sensors into auto alarm system • Transfer alarm to IP network via email and SNMP trap Cybersecurity Network Solution to Minimize Security Risks The IGS-20160HPT supports SSHv2 and TLS protocols to provide strong protection against advanced threats.
PAGE 3
IGS-20160HPT High Power PoE for Security and Public Service Applications As the whole system comes with a total 320-watt PoE budget, the IGS-20160HPT is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (pan, tilt, zoom) speed dome network cameras and other PoE network devices.
PAGE 4
IGS-20160HPT PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-20160HPT can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
PAGE 5
IGS-20160HPT Effective Alarm Alert for Better Protection The IGS-20160HPT supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource.
PAGE 6
IGS-20160HPT Robust Layer 2 Features The IGS-20160HPT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-20160HPT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 4K. Via aggregation of supporting ports, the IGS-20160HPT allows the operation of a high-speed trunk combining multiple ports.
PAGE 7
IGS-20160HPT 1588 Time Protocol for Industrial Computing Networks The IGS-20160HPT is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
PAGE 8
IGS-20160HPT Intelligent SFP Diagnosis Mechanism The IGS-20160HPT supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
PAGE 9
IGS-20160HPT Layer 3 VLAN Dynamic Routing and PoE Application With the built-in robust IPv4/IPv6 Layer 3 traffic routing protocols, the IGS-20160HPT ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 32 routing entries. The IGS-20160HPT is certainly a cost-effective and ideal solution for enterprises.
PAGE 10
IGS-20160HPT Specifications Product IGS-20160HPT Hardware Specifications Copper Ports SFP/mini-GBIC Slots 18 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 2 1000/2500BASE-X SFP interfaces (Port-19 and Port-20) Compatible with 100BASE-FX SFP PoE Injector Port 16 ports with 802.
PAGE 11
IGS-20160HPT 48V Power input - 240W maximum (depending on power input) PoE Power Budget 52~56V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 320W maximum (depending on power input) *Dual power input must be the same as DC voltage, like dual 56V Max. Number of Class 2 PDs 16 Max. Number of Class 3 PDs 16 Max. Number of Class 4 PDs 10 Layer 3 Functions IP Interfaces Max. 128 VLAN interfaces Routing Table Max.
PAGE 12
IGS-20160HPT Port Security Security IP source guard Dynamic ARP inspection Command line authority control based on user level AAA RADIUS client TACACS+ client IEEE 802.1x port-based network access control Network Access Control MAC-based authentication Local/RADIUS authentication Switch Management Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSHv2, TLS v1.
PAGE 13
IGS-20160HPT Dimensions Top View 39.55 30 DI 0 DI 1 DO 0 DO 1 GND GND 48.4 Max. fault loading: 24V, 1A V1+ V2+ PWR1 Fault Input: 48-56V PWR2 , 7.5A max. Dual power input is required for maximum PoE loading. Refer to user’s manual for more details. Mounting Kit 50 Side View Side View Front View 18 Rear View 18 40 28 9.2 Reset 802.3at PoE+ P1 1 2 3 4 5 6 P2 Fault Ring R.O. I/O Console 115200,N,8,1 1G LNK DIN-Rail Kit ACT 25.
PAGE 14
IGS-20160HPT Available Modules MGB2G-Series Transceiver 2500BASE-SX/LX Transceiver MGB-Series Transceiver 1000BASE-SX/LX Transceiver MFB-Series Transceiver 100BASE-FX SFP Transceiver Available Modules PWR-480-48 48V, 480W Din-rail Power Supply (NDR-480-48, adjustable 48-56V DC Output) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: sales@planet.com.tw www.planet.com.