Quick Guide

18
6.RecoveringBacktoDefaultConguration
To reset the IP address to the default IP address “192.168.0.100”
and the user password to factory default mode (default password is
admin), press the hardware-based reset button on the front panel
for about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx
and default password. Be noted that all the previous setups will be
disappeared after the factory default reset is made.
100/1G/2.5G SFP
Reset
109
P1 P2 Fault
Ring R.O.
8
6
7
5
ACTLNK
1000
9
LNK/ACT1G/2.5G LNK/ACT1G/2.5G
10
LNK
ACT
Reset Button
Figure 6-1: IGS-10020MT Reset Button