Datasheet

3
IGS-12040MT
• IPv4IGMPSnoopingportltering
• IPv6MLDSnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x Port-based / MAC-based network access
authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC / IP address binding
• DHCPSnoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console / Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSHv2 and TLSv1.2 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms, and events)
– SNMPtrapforinterfaceLinkUpandLinkDownnotication
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual Images
• DHCP Relay and DHCP Option 82
• DHCP Server
• User Privilege levels control
SMTP/SNMP Trap Event Alert
The IGS-12040MT provides event alert function to help to diagnose the abnormal
device owing to whether or not there is a break of the network connection, or the
rebooting response.
Effective Alarm Alert for Better Protection
The IGS-12040MT supports a Fault Alarm feature which can alert the users when
there is something wrong with the switches. With this ideal feature, the users would
not have to waste time finding where the problem is. It will help to save time and
human resource.
IGS-12040MT
Grand Master
Transparent Clock
Base Station
Slave
Base Station
Base Station
1000BASE-SX/LX Fiber Optic
1000
1000 1000
RJ45/Fiber Connection
Link Down
DC/DC Power Failure
Fault Alarm Feature
SNMP
TRAP
Mail
or
System
Log
Digital Input and Digital Output for External Alarm
The IGS-12040MT supports Digital Input and Digital Output on its upper panel. The
external alarm enables users to use Digital Input to detect external device’s status
(such as door intrusion detector), and send event alarm to the administrators. The
Digital Output could be used to alarm the administrators if the IGS-12040MT port is
link-down, link-up or power-dead.