User Manual

17
3.3 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an
SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable.
You can plug in and out the transceiver to/from any SFP port
without having to power down the Industrial Gigabit Ethernet
Switch as Figure 2-3 shows.
MGB/MFB
Series Module
Figure 3-1: Plug-in the SFP Transceiver
PLANET Industrial Gigabit Ethernet Switch supports 100/1000
dual mode with both single mode and multi-mode SFP
transceivers.
1. Before we connect Industrial Gigabit Ethernet Switch to the
other network device, we have to make sure both sides of
the SFP transceivers are with the same media type, for
example, 1000BASE-SX to 1000BASE-SX, 1000BASE-LX to
1000BASE-LX.